Turn probing into a product advantage
An OEM probe should be more than a standard accessory with a different logo. We develop it as part of your instrument, so it preserves signal integrity and makes the most of the system’s bandwidth.
Turn probing into a product advantage
An OEM probe should be more than a standard accessory with a different logo. We develop it as part of your instrument, so it preserves signal integrity and makes the most of the system’s bandwidth.
Built on a proven platform
A new probe should not start from a blank page. Our SR probe platforms are already designed, characterised and tested by TÜV Rheinland against IEC 61010-031. We adapt bandwidth, attenuation, interface, mechanics, connector and brand to your instrument, so you get your own probe without the risk of a design from scratch.
Your instrument is the starting point
A probe that performs well with one instrument may not with another. A representative instrument is integrated into our development environment, and we characterise its input paths, ranges and operating modes before we develop the probe around it. The instrument should define the measurement capability, not the probe.
Handsfree, under your brand
Many measurements need more hands than the engineer has. We combine your probe with our magnetic handsfree positioning system, so the probe stays on the test point while the engineer works the instrument. Delivered in your brand, it becomes part of your instrument, not an accessory from someone else.
Performance defined before development
Each OEM program gets its own technical acceptance criteria, agreed with you and verified on the actual instrument.
Depending on the platform, typical design targets include amplitude flatness within ±0.5 dB through at least one third of the specified bandwidth, with the response above −2 dB at the specified probe bandwidth. Limits can also be set for rise time, overshoot, ringing, loading, compensation range, input characteristics and mechanical performance.
These are typical engineering targets, not product claims. Final limits are agreed with you.
A controlled path to series production
01. Project definition
Together we define the instrument platform, target bandwidth, attenuation, input characteristics, mechanical interface, expected volumes, target markets, branding and technical acceptance criteria. Both teams have a clear specification before development begins.
PCBite SQ200 for the Saleae Logic MSO
Commissioned by Saleae and developed together with them, this 200 MHz probe is designed and tuned for the Saleae Logic MSO, with an SMB connector that fits the instrument directly. Saleae stocks it and sells it directly as an approved accessory.
SQB1 I3C probe for the Binho Supernova
Commissioned by Binho and developed together with them, the SQB1 is an I3C probe designed and adapted for the Binho Supernova host adapter. Binho stocks it and sells it directly as an approved accessory.
Ready for technical approval and supplier qualification
An OEM program must support your engineering, quality, compliance, purchasing and supply-chain processes, not only electrical performance.
We keep controlled technical and compliance documentation: product safety, EU declarations of conformity, RoHS, REACH, packaging requirements and market-specific material assessments. See Compliance.
We also keep documented policies on business ethics, labour and human rights, and responsible procurement, which guide our own work and our relationships with manufacturing partners and suppliers.
Every probe. Tested before shipment.
Design validation confirms the product. Unit-level production testing verifies every probe we deliver.
Every probe. Tested before shipment.
Design validation confirms the product. Unit-level production testing verifies every probe we deliver.
Make the probe part of your instrument’s advantage
Tell us about the instrument platform, target performance, intended markets, expected annual volume and planned launch. Your request goes straight to the engineers who will develop and industrialise the solution.
Or email us at sales@sensepeek.com.