Skip to content
5x probe needle tips, replacement gold-plated spring-loaded needles for SQG probe series (PCBITE-7017)
Two SQG probes with spring-loaded probe tip and spring-loaded dual ground (PCBITE-7017)
PCBITE-7017

5x Probe tip needle

Five spring-loaded test needles for PCBite SQG15, SQG30 and SQG60 probes, AC and DC. Replace a worn needle on the spot.

Secure paymentGlobal deliveryPremium quality
In stockDelivery: 1-2 business days

19 € excl. VAT

Introduction

Spare test needles for the PCBite SQG high-frequency probes. Swap a worn needle on the spot and keep the same stable contact on fine-pitch test points.

Five spring-loaded test needles for all PCBite SQG probes, SQG15, SQG30 and SQG60 in both AC and DC versions. It is the same fine-pitch needle that is fitted in the probe at delivery.

The spring gives a defined, consistent contact force on the test point, which keeps the connection stable through long captures and repeated measurements. When a needle wears, it is replaced in the probe on the spot, so the probe itself stays in service.

Every SQG probe is delivered with one spare needle. A five-pack keeps you covered on a busy bench or across several probes.

Compatible products

  • 5X Extra test needle (SQG)
Instruction 5x Probe tip needle SQG Datasheet Probe tip needle SQG
Brand

PCBite
Manufacturer

Sensepeek AB
Article number

PCBITE-7017
GTIN

7350145660557
Country of origin

China
HS code

90309000
HTS code

9030906800
ECCN

EAR99
Safety information

See downloads
Package weight 40 g
Package dimensions 176 × 125 × 10 mm
MATERIAL

Made to last

Every material and design detail is chosen to last for years in a demanding lab environment.

 

Test needle
Fine-pitch spring-loaded
Tip
Sharp 60° cone
Plating
Gold over nickel
Lifetime
Rated for 30,000 cycles
MATERIAL
Test needle
Fine-pitch spring-loaded
Tip
Sharp 60° cone
Plating
Gold over nickel
Lifetime
Rated for 30,000 cycles

Made to last

Every material and design detail is chosen to last for years in a demanding lab environment.

 

Gold-plated spring-loaded test needle resting on a pin of a small SMD chip, giving a stable low-resistance contact.
GOLD-PLATED

Excellent conductivity, test after test.

Gold is a proven contact material with excellent conductivity, and the plating over nickel keeps the contact surfaces free from oxidation. The result is a stable, low-resistance connection on every test point, from the first measurement to the last.

NEEDLES

Every needle, spring-loaded.

Both the test needle and ground needle are spring-loaded, providing a defined, consistent contact force on the pad. This keeps the connection stable throughout the measurement, even if the setup is bumped or exposed to vibration.

Du använder en föråldrad webbläsare. Alla funktioner fungerar inte i din webbläsare. Var vänlig uppgradera din webbläsare för att förbättra din upplevelse och öka din säkerhet.