Skip to content
Replacement yellow PCB insulation washers and black bottom caps fitting both PCB and probe holder (PCBITE-4004)
Replacement black bottom caps fitting both PCB and probe holders includes yellow PCB insulation washers (PCBITE-4004)
PCBITE-4004

Wear and tear – PCBite holder

Eight yellow insulation washers and four bottom caps for PCBite holders and handsfree probes. Replace worn parts and keep the setup sliding smoothly and insulated.

Secure paymentGlobal deliveryPremium quality
Out of stockExpected back in stock 2026-11-06

7 € excl. VAT

Introduction

Fresh insulation washers and bottom caps for PCBite holders and probes. A simple replacement that keeps every base sliding smoothly and every powered PCB insulated.

A spare parts set for PCBite holders with eight yellow insulation washers and four bottom caps. Replace worn parts to keep holders and probes working like new on the base plate.

The insulation washers separate the metal holder from the PCB traces, so powered boards can be held safely. Replace them when they are worn or lost to keep the insulation intact.

The black bottom caps are the low friction pads under the magnetic base, between the holder or probe arm and the base plate. A fresh cap lets the base slide smoothly when you reposition it, while the magnet keeps it in place.

The bottom caps fit all PCBite holders and the magnetic base of every PCBite handsfree probe.

Compatible products

  • 1X Set of bottom caps (4 pcs)
  • 1X Set of insulation washers
Instruction Wear & tear
Brand

PCBite
Manufacturer

Sensepeek AB
Article number

PCBITE-4004
GTIN

7350145660038
Country of origin

China
HS code

90309000
HTS code

9030906800
ECCN

EAR99
Safety information

Not applicable
Package weight 30 g
Package dimensions 176 × 125 × 10 mm
MATERIAL

Made to last

Every material and design detail is chosen to last for years in a demanding lab environment.

Insulation washers
Non-conductive, yellow
Bottom caps
Wear-resistant, low friction
MATERIAL
Insulation washers
Non-conductive, yellow
Bottom caps
Wear-resistant, low friction

Made to last

Every material and design detail is chosen to last for years in a demanding lab environment.

Powered PCB held by two PCBite holders with yellow insulation washers, probed with red and black probes in front of a bench supply.
INSULATION WASHERS

Power up your PCB safely.

Insulation washers keep the PCB securely isolated from the metal holder, so you can power and test your design safely. Fresh washers keep the insulation intact, board after board.

Hand showing how to open a low profile PCB holders, pushing down against the table (PCBITE-7023)
BOTTOM CAPS

Ensure smooth movement.

With fresh bottom caps, holders and probes glide across the base plate with a light push and stop exactly where you let go. Fine adjustments stay quick and precise, even after years of daily use.

Du använder en föråldrad webbläsare. Alla funktioner fungerar inte i din webbläsare. Var vänlig uppgradera din webbläsare för att förbättra din upplevelse och öka din säkerhet.